This is a pseudo-mirror of www.bores.com DSP intro at http://www.bores.com/courses/intro/freq/3_spect.htm [sic] as per the policy of this site.
This mirror was created from the source on 03/08/2000 at 22:46 Central Time.
Commercial information, time-dependent information, and all the damn JAVA scripts have been removed.  All "htm" extensions have been changed to the proper "html" extensions.  Has also been edited for coherence, proper-linkage, and better document flow.
Copied without permission.

Introduction to DSP

Frequency analysis

Frequency spectra

Using the Fourier transform, any signal can be analysed into its frequency components.

The diagram shows a recording of speech, and its analysis into frequency components.

With some signals it is easy to see that they are composed of different frequencies: for instance a chord played on the piano is obviously made up of the different pure tones generated by the keys pressed. For other signals the connection to frequency is less obvious: for example a hand clap has a frequency spectrum but it is less easy to see how the individual frequencies are generated.

You can use a piano as an acoustic spectrum analyser to show that a hand clap has a frequency spectrum:

• open the lid of the piano and hold down the 'loud' pedal
• clap your hands loudly over the piano
• you will hear (and see) the strings vibrate to echo the clap sound
• the strings that vibrate show the frequencies
• the amount of vibration shows the amplitude

Each string of the piano acts as a finely tuned resonator.

| Last updated: 18th January 2000 | http://www.bores.com/courses/intro/freq/3_spect.htm

Telephone: 01483 740138 fax: 01483 740136 email:  Web: http://www.bores.com